Changing the ink cartridge on a canon mp640 printer

You need to prepare: a sheet of A4 or Letter-sized Canon Matte Photo Paper MP-101 If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Check the error message displayed on the LCD. If the ink lamp is still off after reinstalling the ink tank, there has been an error and the machine cannot print.

If it does not click into place, make sure that the orange protective cap has been removed from the bottom of the ink tank. If the ink tank is not installed properly, press the mark (Push) on the ink tank until the ink tank clicks into place. The ink tank is not installed properly or the function for detecting the remaining ink level is disabled. If the position is correct but the lamp flashes, there has been an error and the machine cannot print. Make sure that the ink tank is installed in the correct position as indicated by the label on the Print Head Holder. The ink tank is installed in the wrong position or it is empty. The ink tank is correctly installed and there is sufficient ink left for printing.ДЇlashing slowly (at around 3-second intervals)ДЇlashing fast (at around 1-second intervals) Lift the Scanning Unit (Cover) until it stops.Д¬lose the Scanning Unit (Cover) after confirming the ink lamp status.

Make sure that the power is turned on, and open the Paper Output Tray gently. You can also check the ink status on a screen of the LCD displayed while printing. Make sure that the ink lamp lights up red. Press the mark (Push) on the ink tank until the ink tank snaps firmly into place. Make sure that the position of the ink tank matches the label. Insert the front end of ink tank into the Print Head at a slant. Discard it according to the local laws and regulations regarding disposal of consumables.Дo not touch the open ink port once the protective cap is removed, as this may prevent the ink from being ejected properly. Be careful to handle the ink tank.Дo not squeeze the side of ink tanks as this may cause the ink to leak out.Д«e careful not to stain your hands and the surrounding area with ink on the removed protective cap.Дo not reattach the protective cap once you have removed it. If you shake the ink tank, the ink may spill out and stain your hands and the surrounding area. It can cause the machine to malfunction or become unable to print. Do not touch the electrical contacts (E) on the ink tank.

Changing the ink cartridge on a canon mp640 printer